Chinese firmware Android is a very controversial matter. Due to the huge number of devices released, there are also many firmware methods. Most of them can be dealt with using standard methods, while others need to be dealt with in exclusive ways. Let's take a closer look at the example of an old resistive device MID M7206 with an even more ancient IMAP X210 processor. The gadget itself was not chosen in vain, because at the dawn of tablets it was he who was available to everyone, everywhere and cost a penny, but the most interesting thing is that it lacks a USB port.
Training
Let's make a reservation that the need for the firmware arose on its own. The tablet began to hang at the boot stage – on the inscription Android … Hard resets and other methods did not help.
As mentioned, there is no USB interface. It is compensated by a PIN output, to which a PINLANUSB adapter is included. Of course, you can use it, but in extreme cases. The fact is that the connector is often loosened and not all contacts are tight. This can cause the gadget to turn into a brick. We will be using an SD card.
For the latter, you need to download a normal working firmware, which is difficult to find for this model. Others are not recommended, even if they seem to fit.
Upload the downloaded files to an SD-card previously formatted in FAT 32 format. Files from the archive must be unpacked, but not thrown directly into the root of the flash drive, as always, but create a special directory with the name Android.
The memory card must be no more than 2 GB.
to the content
Process
Let's figure out further how to reflash Chinese Android MID M7206. Turn off the device and insert the SD card. Then just press the Power button. You don't need to hold down the volume buttons or the Home button. Just turn it on.
Automatic processes will start.
You just have to wait for quite some time. The device will erase all data, mark up the internal ROM, copy files from the USB flash drive and install the operating system. The end of the procedure will be evidenced by an inscription in which you will be asked to remove the USB flash drive and restart the gadget.
The first download will take a long time. Only the inscription Android, on which the device was initially visible, will be displayed for about 5 minutes. Further, everything is standard. Select your language, calibrate the display, authorize your Google account.
Well, that's all, now you know that flashing Chinese Android can sometimes be much easier and more unusual than always, that there are interesting methods, and sometimes exclusive ones.
In general, the firmware of antediluvian Chinese tablets Android, on the white boxes of which only the MID inscription is present, occurs in this way. If you sew through a wire, then the files from the given firmware will need to be initially written with a special program, and in the tablet itself, mark the ROM. This is a laborious process with many drawbacks and pitfalls.
to the content